Wannenwetsch worldwide.
Wannenwetsch GmbH is a global company. Accordingly, you have two options for viewing our reference projects: Either use the product filters or click the project site on the map. If you choose not to use any of the filters, you will find our most recent projects below.
Type of operation:
Concrete renovation and reinforcement of wall and ceiling, as well as curved and projecting parts
Special feature:
Difficult accessibility, wall heights above 30 m, 24/7 use
Equipment technology:
Telescopic robot, standard robot, hand lance
Unit:
1.000 bar technology
Cutting:
500 m³ concrete cutting (15 cm thick) on walls, floors, bends and other projecting parts | 1000 m² substrate preparation
Type of operation:
Total demolition of the diaphragm wall
Special feature:
Working under application of compressed air in excavation chamber
Equipment technology:
Special construction
Unit:
2 x 550 kW including exhaust air design
Cutting:
4 x 100 m³, each in 20 days
Type of operation:
Remedial works on chloride-damaged parking level surfaces and kerbs
Special feature:
2.000 - 2.200 bar high-pressure pumps with state-of-the-art particulate filter
Equipment technology:
Standard robot with special 2-jet nozzle and hand lances
Units:
HDP 554 with 2.000 bar, HDP 484 with 2.000 bar, KD 725 with 2.000 bar – all with CRT particulate filter + standard cutting robot HDP 114 with 2.350 bar, HDP 124 with 2.450 bar, KD 724 with 2.000 bar all with BP diesel particulate filter + hand lance
Cutting:
41.000 m² concrete cutting on parking level top surface, average 8 cm | 240 m³ concrete cutting on kerbs
Type of operation:
Large-scale concrete cutting as part of fire damage repair
Special feature:
Simultaneous use of five tunnel robots
Equipment technology:
Telescopic robot
Units:
5 x KD 412, 1.000 bar with 240 l/min
Cutting:
1.500 m³ in 60 day, average 30 cm depth
Type of operation:
Partial demolition of the cantilever for the installation of an edge reinforcement beam, removal of chloride-damaged concrete on the bridge deck, substrate preparation for the sealing work
Special feature:
Very hard concrete, very short construction phases, coupling of the high-pressure units
Equipment technology:
Standard robot, hand lance
Units:
KD 412 with 1.000 bar, partially coupled
Cutting:
Partial demolition of 100 m³ cantilever plate (25 cm thick), partial demolition of 2.000 m² carriageway slab (3.5 cm thick), 10.000 m² surface preparation
Type of operation:
Renovation of the Inn Canal
Special feature:
Substrate preparation of embankments with a consistent gradient of 40°
Equipment technology:
Special construction
Unit:
450 kW inclusive exhaust air concept
Abtrag:
570.000 m² in 60 days / 10.000 m² per day
Type of operation:
Remedial works on the dam wall
Special feature:
Working on narrow trusses up to 30 m high
Equipment technology:
Telescopic robot, standard robot and hand lance
Units:
HDP 553 with 1.100 bar, 220 – 240 l/min, HDP 124
Cutting:
Water-side 5.000 m² concrete cutting at 5 - 30 cm depth and 6 - 12 m processing height
Land-side 6.000 m² concrete cutting at up to 5 - 10 cm depth and 6 - 30 m processing height
Type of operation:
Horizontal concrete cutting
Special feature:
Wall heights up to 12 m, new development of Type 4 telescopic robots
Equipment technology:
Type 4 telescopic robot
Unit:
450 kW unit
Cutting:
400 m³ with 5 - 10 cm depth in 4 construction phases
Type of operation:
Substrate preparation at the front side of the floodgate
Equipment technology:
Standard robot
Unit:
1.000 bar unit
Cutting:
1.500 m² concrete cutting at the front side of the floodgate (average 4 cm)
Type of operation:
Repair of the leaky building joints by removing 20 cm of concrete from ceilings and walls, and exposing the butt joints
Special feature:
Development of the Type 1 telescopic robot for ceiling heights > 5 m, concrete strength B75, 24/7
Gerätetechnik:
Telescopic robot and standard robot
Unit:
KD 412 with 1.000 bar
Cutting:
1.500 m³ concrete cutting (between 10 and 20 cm)
Type of operation:
Reconstruction of a silo through partial demolition of the dome walls
Special feature:
Transport of personnel and equipment technology to Latvia, complete demolition up to 46 cm with wall heights up to 10 m, piecemeal demolition and reconstruction according to specifications of the client
Equipment technology:
Telescopic robot, hand lance
Unit:
KD 412 and HDP 170
Cutting:
100 m³ concrete cutting (average 46 cm thick)
Type of operation:
Removal of strips of concrete on the carriageway surface
Special feature:
Use of 2000 bar technology at an airport
Equipment technology:
Standard robot
Unit:
2.000 bar, 120 l/min
Cutting:
10 m³ concrete cutting (average 10 cm thick)
Type of operation:
Concrete cutting in the rock for a recess about 1 m deep
Special feature:
Use of an electric generator, high-pressure water blasting in the rock, robots and pump transported by cable car in the access tunnel
Equipment technology:
Type 4 telescopic robot
Unit:
Electric generator with 3.000 bar power
Learn more now!
Would you like advice or information, or do you have a query for Wannenwetsch? We look forward to hearing from you.